High Gloss Intermediate Calendered Vinyl 3 MIL • 6 YEAR
These PVC Films are HIGH GLOSS with excellent stability. They are soft in nature and will conform to curved or flat surfaces, which makes them superior for die cutting and flexible range of films. These films have a very high tack adhesive specifically formulated for banner graphics and lettering. They have a long-term FIVE (5) YEAR OUTDOOR DURABILITY for outdoor signage. APPLICATION WITH WATER ONLY. NOT TO BE USED WITH SOLVENT BASED APPLICATION FLUIDS.
CONSTRUCTION
Face Film
3 mil high gloss, intermediate calendered vinyl film
Adhesive Release
Aggressive, acrylic, permanent, pressure-sensitive. Not to be used with solvent based application fluids
Liner
78# (White) Bleached Kraft
PHYSICAL PROPERTIES
Outdoor Durability
5 years, mid-continental U.S., vertical.
Minimum Surface/Ambient Air Application Temperature
+ 35° F.
Application Surface
Interior and exterior markings/decals requiring low cost and flexible products. e.g. original equipment markings.
Service Temperature Range
50°F. to +150°F. — Reasonable range of temperatures, which would be expected under normal environmental time and temperature conditions.
Opacity
Normal
Typical Film Caliper (w/adhesive)
3.8 – 4.2 mils
Chemical Resistance
Good for most petroleum solvents and lower aliphatic alcohols. For ultimate solvent resistance, edge sealing is recommended.
Water Resistance
Excellent: Test piece aged 24 hrs. after application to stainless steel panel before testing. Not affected when immersed in 70°F water for seven days.
NOTE: Always pretest your specific substrates prior to actual application.
Adhesion
50 oz/in.
Shelf Life
2 years when stored under conditions of 70°F and 50% relative humidity.
Sizes
Width
(INCHES)
X
Length
(YARDS)
*15 in.
X
50 yds.
20 in.
X
50 yds.
24 in.
X
50 yds.
*30 in.
X
50 yds.
36 in.
X
50 yds.
48 in.
X
50 yds.
**60 in.
X
50 yds.
*
Please specify punched or unpunched.
**
MATTE BLACK & MATTE WHITE AVAILABLE IN 54” NOT IN 60”.
GOLD & SILVER AVILABLE IN 60
COPPER AVAILABLE IN 48"
The following information on physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guarantee and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.)
GMI Series CV300
CONSTRUCTION
