GMI Series 700 is an opaque cast vinyl film with a high tack permanent solvent acrylic adhesive on a 78# bleached Kraft liner. Series 700 is thermal print compatible with excellent dimensional stability, cutting and weeding characteristics. Ideal for vehicle and fleet graphics.
 CONSTRUCTION |
Application
Vehicle graphics, architectural signs, applications requiring durability and conformability |
Face Film
2 mil cast vinyl
|
Adhesive Release
Clear acrylic / tight release for sign cutting |
Liner
78# blank white kraft liner |
| PHYSICAL PROPERTIES |
Outdoor Durability
Up to 8 years (vertical only) |
Minimum Surface/Ambient Air Application Temperature
40° F. |
Printing Methods
Thermal transfer |
Application Surface
Flat, compound curves, rivets, corrugations |
Converting Methods
Roll striping, sign cutting, thermal die cutting, steel rule die cutting |
Service Temperature Range
-50° F to +180°F |
Opacity
Opaque, varies with color |
Typical Film Caliper (w/adhesive)
0.0032” |
Product Thickness (Film Only)
0.0022” |
Chemical Resistance
Resistant to most mild acid & alkali solutions |
Water Resistance
Resistant to water, keep marine graphics above static water line |
Adhesion
Applied to stainless steel 15m 3.0#/in; 24 hrs 4.0#/in (pulled at 180° angle at 12” per minute) |
Finish
High gloss |
Shelf Life
One year |
Sizes
| Width (INCHES) |
X |
Length (YARDS) |
| *15 in. |
X |
10 & 50 yds. |
| 24 in. |
X |
10 & 50 yds. |
| *30 in. |
X |
10 & 50 yds. |
| **36 in. |
X |
10 & 50 yds. |
| 48 in. |
X |
10 & 50 yds. |
| **60 in. |
X |
10 & 50 yds. |
|
| * |
Please specify punched or unpunched. |
| ** |
Limited color selection |
|
GMI Series CV300
