7125 series film is an opaque cast vinyl film with high-tack adhesive on a 78 # liner. The 7125 premium cast vinyl offers the best cutting, weeding and transferring characteristics available. It is designed for the most demanding permanent interior/exterior application.
Outdoor Durability
7 years when properly processed and applied (Vertical exposure, unprinted film).
Minimum Surface/Ambient Air Application Temperature
50° F. to 90°F. (10° C to 32°C)
Service Temperature Range
-40° F. to +225° F. (-40° C. to +107° C.) -Reasonable range of temperatures, which would be expected under normal environmental time and temperature conditions.
Typical Film Caliper (w/adhesive)
2.5 – 3.5 mils
Chemical Resistance
Resists mild acids, alkalis, and salts.
Water Resistance Excellent water resistance
NOTE: Always pretest your specific substrates prior to actual application.
Adhesion
Substrate
24 hrs.
Acrylic
7 lb/in. (1.2 kg/cm)
Alodine Aluminum
9 lb/in (1.6 kg/cm)
Auto BC/CC
5 lb/in (0.9 kg/cm)
Fruehauf Prepainted Panels
6 lb/in (1.1 kg/cm)
Polycarbonate
6 lb/in (1.1 kg/cm)
Polypropylene
3 lb/in (0.5 kg/cm)
Shelf Life
2 years when stored in a clean, dry area, out of the direct sunlight, and at less that 100° F. (38° C)
Sizes
Width (INCHES)
X
Length (YARDS)
3.5 in.
X
50 yds.
*15 in.
X
10 & 50 yds.
20 in.
X
10 & 50 yds.
24 in.
X
10 & 50 yds.
*30 in.
X
10 & 50 yds.
**36 in.
X
10 & 50 yds.
48 in.
X
10 & 50 yds.
**60 in.
X
10 & 50 yds.
*
Please specify punched or unpunched.
**
Limited color selection
The following information on physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guarantee and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.)
GMI Series CV300
CONSTRUCTION
