These pigmented cast polyvinyl chloride films have a SIX (6) MONTH OUTDOOR DURABILITY. Designed for safety and high visibility applications. These fluorescent films have very high tack adhesives specifically formulated for banner graphics and lettering. The white adhesive makes these films suitable for first surface application ONLY on a transparent synthetic release liner.
CONSTRUCTION
Film, 60º Gloss
80 plus
Adhesive
Permanent solvent acrylic
Release Liner
78# Bleached Kraft
PHYSICAL PROPERTIES
Application Surface
Flat, curved corrugated
Outdoor Durability
6 Month.
Minimum Surface/Ambient Air Application Temperature
+40ºF. (4ºC)
Typical Film Caliper, ± 10%
2.3 mils
Repositionable
No
Shrinkage and Gasoline Resistance
Good
Sizes
Width (INCHES)
X
Length (YARDS)
*15 in.
X
10 & 50 yds.
24 in.
X
10 & 50 yds.
*30 in.
X
10 & 50 yds.
48 in.
X
10 & 50 yds.
*
Available punched or unpunched.
The following information on physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guarantee and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.)
GMI Series CV300
CONSTRUCTION
