Scotchlite™ Engineer Grade Reflective Sheeting™ 7 mil • 7 YRS
Engineer grade sheeting is highly durable adhesive coated opaque sheeting. Engineer grade sheeting remains brilliantly reflective even when totally wet by rain. These materials are for use as industrial signing materials only and are not warranted for use on vehicles.
CONSTRUCTION
Face Film
Reflective sheeting
Adhesive
White permanent, pressure sensitive
Release Liner
78# Bleached Kraft
PHYSICAL PROPERTIES
Outdoor Durability
7 years when properly processed and applied (vertical exposure, unprinted film)
Shelf Life
2 years when stored in a clean, dry area, out of the direct sunlight, and at less that 100º F. (38º C).
Minimum Surface/Ambient Air Application Temperature
68º F. (18º C)
Service Temperature Range
-65º F. to +225º F. (-60º C. to +107º C.) (Reasonable range of temperatures, which would be expected under normal environmental time and temperature conditions.
Typical Film Caliper (w/adhesive)
7 mils
Chemical Resistance
Resists mild acids, mild alkalis, and salts
Water resistance
Excellent resistance to water
Adhesion 5lb/in at 77° F (0.9 kg/cm at 25°C)
NOTE: Always pretest your specific substrates prior to actual application.
Sizes
Width (INCHES)
X
Length (YARDS)
*15 in.
X
10 & 50 yds.
24 in.
X
10 & 50 yds.
*30 in.
X
10 & 50 yds.
**36 in.
X
10 & 50 yds.
48 in.
X
10 & 50 yds.
*
Available punched or unpunched
**
SPECIAL ORDER
The following information on physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guarantee and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.)
GMI Series CV300
CONSTRUCTION
