Scotchlite™ Plus Reflective Sheeting™
Repositionable Flexible Reflective Sheeting
7 mil • 7 YRS
3M Scotchlite flexible reflective sheeting Series 680 is warranted for corrugation, flat, flat with rivets, moderate curved surfaces. Excellent for use on multi-color commercial vehicle graphics, railroad graphics (warranted for 5 years) and striping. Also, for graphics subjected to gasoline vapors or occasional spills. Process applications include screen-printing and electrostatic imaging.
 CONSTRUCTION |
Face Film
7.0 mil
|
Adhesive
Pressure activated, positionable |
Release Liner
94#, polyethylene coated paper |
| PHYSICAL PROPERTIES |
Outdoor Durability
7 years when properly processed and applied - vertical exposure, unprinted film |
Shelf Life
2 years when stored in a clean, dry area, out of the direct sunlight, and at less that 100º F. (38º C) |
Minimum Surface/Ambient Air Application Temperature
50º F - 100º F. (10º C - 38º C) |
Service Temperature Range
-30º F. to +200º F. (-34º C. to +93º C.) - Reasonable range of temperatures, which would be expected under normal environmental time and temperature conditions |
Typical Film Caliper (w/adhesive)
0.18 to 0.20 mm |
Chemical Resistance
Resists mild acids, mild alkalis, and salts, and occasional fuel spills |
Water resistance
Excellent resistance to water |
Adhesion
| Substrate |
24 hrs. |
| Aluminum anodized |
5.0 lbs/in (0.9 kg/cm) |
| Aluminum, etched |
5.0 lbs/in (0.9 kg/cm) |
| FRP |
3.9 lbs/in (0.7 kg/cm) |
Fruehauf Prepainted
Panels |
4.5 lbs/in (0.8 kg/cm) |
|
NOTE: Always pretest your specific substrates prior to actual application. |
Sizes
| Width (INCHES) |
X |
Length (YARDS) |
| *15 in. |
X |
10 yds. |
| *15 in. |
X |
50 yds. |
| 24 in. |
X |
10 yds. |
| 24 in. |
X |
50 yds. |
| *30 in. |
X |
10 yds. |
| *30 in. |
X |
50 yds. |
| **36 in. |
X |
10 yds. |
| **36 in. |
X |
50 yds. |
| 48 in. |
X |
10 yds. |
| 48 in. |
X |
25 yds. |
| 48 in. |
X |
50 yds. |
|
| * |
Available punched or unpunched |
| ** |
SPECIAL ORDER |
|
The following information on physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guarantee and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.) |
GMI Series CV300
