GMI Computer Cut Graphics

COMPUTER CUT GRAPHICS
Instant Directory

Calendered Opaque Films
Avery HP 700
Avery PC 500
High Performance
Cast Opaque Films
Metallic Films
Reflective Films
Translucent / Transparent Films
Avery UC 900
Avery PR 800
Window Graphic Films
Specialty Vinyl Films
Fluorescent Films
Magnetics

GMI Holographics

2 MIL

This revolutionary new holographic imaged vinyl film is BRIGHTER that any traditional type product presently available. It should be applied to a smooth, flat surface for the best results. It can be used for POP displays, specialty stickers, and many other uses. NOT RECOMMENDED FOR OUTDOOR USE.

CONSTRUCTION

Face Film
2.0 mil rigid vinyl film (metallized)

Adhesive Release
Permanent, pressure-sensitive
Release Liner
96# Stay Flat
PHYSICAL PROPERTIES
Outdoor Durability
NOT RECOMMENDED FOR OUTDOOR USE.
Application Surface
Smooth, Flat Surface
Service Temperature Range
-50ºF. to 275ºF. - Reasonable range of temperatures which would be expected under normal environmental time and temperature conditions.
Typical Film Caliper (w/adhesive)
2.7 - 3.0 mils
Product Variations
Available with a removable acrylic adhesive and can be top coated for improved ink adhesion.
Water Resistance
Excellent. Test piece aged 24 hrs after application to stainless steel panel before testing. Not affected when immersed in 70ºF water for seven days.
Chemical Resistance
Good for most petroleum solvents and lower aliphatic alcohols. For ultimate solvent resistance, edge sealing is always recommended. NOTE: Always pretest your specific substrate prior to actual application.
Humidity Resistance
Excellent.
Opacity
These films will completely hide black legend upon application.
Shelf Life
2 years when stored under conditions of 70ºF. and 50 R. H.

Sizes

Width (INCHES) X Length (YARDS)
*15 in. X 10 & 50 yds.
20 in. X 10 & 50 yds.
24 in. X 10 & 50 yds.
*30 in. X 10 & 50 yds.
40 in. X 10 & 50 yds.

 

*

Available punched or unpunched.

The following information on physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guarantee and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.)

[back to top]

AVAILABLE COLORS

DF200-3 AXICON
(2” pattern)

DF200-4 GLITTER

DF200-6 CRACKED ICE

DF200-8 SPINNER

DF200-15 SPARKLE

DF200-9 STREAMERS
E-mail
 

Toll- Free: 800-388-1161 | E-Mail: info@gmintl.com
http://www.gmintl.com | GMI Warranty

E-mail all questions & comments regarding website to webmaster@gmintl.com
© 2010 Graphic Materials International. All rights reserved.