COMPUTER CUT GRAPHICS
Instant Directory

Calendered Opaque Films

GMI Series CV300

High Performance Cast Opaque Films

3M Series 7125 Cast 3M Series 7725 Cast 3M Series 180C Cast

Metallic Films

GMI UW200 Metallic GMI UM200 UltraMetallic

Reflective Films

3M Series 3200 3M Series 680 GMI Engineer Grade Reflective 8100R

Translucent / Transparent Films

GMI Series 200 3M Series 3630

Window Graphic Films

Hi-Stat® Static Cling 3M Series 7725-300SE GMI Series GE200 Banner Media "Imperial" Scrim Banner

Specialty Vinyl Films

3M Series 160C GMI Dry Erase GMI Heavy Metal Films GMI Holographics GMI Metallized Polyester GMI White Semi-Rigid GMI Carbon Fibre Vinyl PhotoLuminescent Film

Fluorescent Films

GMI FL220 GMI FL350

Magnetics

GMI Magnetic Vinyl

High Performance Cast Vinyl Frosted Glass
2 MIL • 5 YEAR

This product was designed to allow signage and graphics to be placed on clear surfaces and give the appearance of a “sandblast” or an “acid-etched” image. It is especially suited for tempered glass or glass doors. OUTDOOR DURABILITY IS FIVE (5) YEARS.

CONSTRUCTION

Face Film 2.0 mil (51 µm) premium, matte, frosted cast vinyl film

Adhesive Release A/C permanent, clear, acrylic pressure-sensitive

Release Liner 78# Bleached Kraft

PHYSICAL PROPERTIES

Outdoor Durability 5 years when properly processed and applied (vertical exposure, unprinted film)

Minimum Surface/Ambient Air Application Temperature +40ºF. (4ºC)

Application Surface Flat

Service Temperature Range -50ºF. to +180ºF. (-46ºC to 82ºC) — Reasonable range of temperatures which would be expected under normal environmental time and temperature conditions.

Typical Film Caliper (w/Adhesive) 3.0 mils (75 µm)

Chemical Resistance Resistant to most petroleum based oils, greased and aliphatic solvents. Resistant to mild acids, alkalies, and salts.

Tensile at Yield 4.0 lb/in. to 8.0 lb/in. (0.7 kg/cm to 1.5 kg/cm)

Elongation 100% minimum

Dimensional Stability Less than 0.015 in. (0.4 mm) shrinkage determined by measurement of unprinted 36 in. (232 cm) film applied to an aluminum test panel after 72 hours aging at 73ºF. (23ºC) 50 ± 5% R. H. followed by 48 hours 150ºF. (65ºC).

Adhesion 180° Peel Substrate 20 min. 24 hrs. 48 hrs. 1 week Stainless Steel 2.5 lb/in (437 N/m) (648 N/m) 3.7 lb/in. Glass 3.4 lb/in. (595 N/m) 4.8 lb/in. (840 N/m) (525 N/m) 5.3 (927 N/m) NOTE: Always pretest your specific substrates prior to actual application.

Shelf Life One year when stored at temperatures under 73ºF. (23ºC) and 50 ± 5% R. H.

Sizes Width (INCHES) X Length (YARDS) *15 in. X 10 & 50 yds. 24 in. X 10 & 50 yds. *30 in. X 10 & 50 yds. 36 in. X 10 & 50 yds 48 in. X 10 & 50 yds. 60 in. X 10 & 50 yds.   * Available punched or unpunched.

The following information on physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guarantee and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.)