These specially formulated films are designed for the SIGN and SCREEN printing industries. They are to be used for store, automotive, truck window graphic displays, decorative trim, toy and game products, and many other applications. Because HI-STAT has NO adhesive coating, the applied surface is left “residue free” when removed. The graphic image can then be saved for reuse.
 CONSTRUCTION |
Face Film
7.5 mils flexible vinyl
|
Adhesive Release
No adhesive coating |
Release Liner
10 pt. kromekote board |
| PHYSICAL PROPERTIES |
Outdoor Durability
2 years (interior of window glass) |
Minimum Surface/Ambient Air Application Temperature
+35ºF. (4ºC) |
Application Surface
Smooth, glossy, clean surface |
Service Temperature Range
10ºF. to +160ºF. (-17ºC to 60ºC) — Reasonable range of temperatures, which would be expected under normal time and temperatures conditions |
Adhesion
Both sides cling securely to glass and other smooth surfaces. |
Lamination
No delaminating from board stock or top coating of vinyl should be apparent. |
Surface Tension
33 Dynes / Cm. Minimum |
Shelf Life
6 months when stored at 75ºF. and 50% R. H. |
Overall Printability
Screen printing recommended. There shall be no delaminating of coating to base vinyl. Check with your ink company for recommendations. |
Water/Humidity Resistance
Excellent |
Dimensional Stability
Excellent |
Material Re-use
Decals can be reused if properly handled. |
Chemical Resistance
Excellent to commercial window cleaners. Poor to strong organic solvents. |
Sizes
Width (INCHES) |
X |
Length (YARDS) |
| *15 in. |
X |
10 & 30 yds. |
| 20 in. |
X |
10 & 30 yds. |
| 24 in. |
X |
10 & 30 yds. |
| *30 in. |
X |
10 & 30 yds. |
| 54 in. |
X |
10 & 30 yds. |
| **60 in. |
X |
10 & 30 yds. |
|
| * |
Available punched or unpunched. |
| ** |
While supplies last. |
|
Additional Information
For general recommendation on steps that can be taken to apply GMI self-adhesive products, review the Application Instructions. |
GMI Series CV300
